RaceChrono V1.25 Beta1 S60V3 S60V5

RaceChrono is a GPS based lap timing software for Nokia Series 60 smart phones. It can be used to measure lap times on almost any vehicle and track. It can be used to measure laptimes for example for motorbikes, bicycles, cars, water jets and quadbikes.

The main feature is of course the Live Timer, which shows your lap- and sector-times in real-time. Also included are a scalable graphical display of traveled path, satellite reception display, speedometer and a compass. When you're back at the pits, you can also browse through your lap and sector times, or view your trap speeds. Or maybe analyze your laps by graphs of time, speed and altitude compared to any another lap.

All lap timing sessions are logged, and the results can be viewed afterwards. The raw NMEA-output from the GPS is also saved, so you can use that in other compatible software if you wish.

And yes, there's always the question of accuracy when it comes to timing anything. After extensive testing, we feel really confident on RaceChrono's accuracy. Our tests together with commercial lap timers have showed an accuracy of between +- 0.03-0.10 seconds with a cheap 5 Hz receiver. Switching to an ordinary 1 Hz SirfStar3 receiver RaceChrono was still very accurate - on the level of +- 0.10-0.15 seconds. Keep in mind however that accuracy is fully dependent on the quality of your GPS receiver and signal reception.

Note that if the signal from the satellites is too weak, your lap times can be inaccurate and in worst case you can even miss some laps. So take care to position your receiver properly on your dash close to the windshield, or maybe even outside the car! Use the satellite reception display to help you find the best location in your car.

You can download tracks from the RaceChrono software itself; by selecting Track profiles > Options > Download new. Just copy the downloaded file to /RaceChrono/Tracks/ on your memory card.

Change log for v1.25 beta1:

Using same code branch with WM version(user interface with improved touchscreen suppot).

User defined performance tests (Performance Tests > Options > Create new)New pre-defined performance tests 0-60mph, 0-100mph and 60-160kph.

Sessions are now loaded from all storages. If you have copied same session to many storages, you may want to delete duplicates.

New sessions are still saved to the selected storage.Tracks are now loaded from all storages.

If you have same track in many storages, the one on your selected storage is loaded.

New tracks are still saved to the selected storage.

When deleting tracks, user not anymore prompted to delete sessions.

Traps can now be added from Browse traps view

Now possible to edit session note in lap view

Fixed: Speed and bearing reading is now generated if GPS does not report them

Fixed: Acceleration testing problems for Samsung InnoV8 internal GPS

Fixed: Imported G2extreme session bearings

Fixed: Invalid default track if it has been deleted

Fixed: “Traveled route > Export” was showing too many scope options for Performance Testing and Data Logging sessions
DOWNLOAD

IF YOU LIKE SHARK MOBILE SERVICE THEN BE COME WITH US AS A FOLLOWERS.
(JUST CLICK & SIGN IN : Follow this blog )

TrekBuddy 0.9.82 - GPS Tracking Application

It features capabilities such asGPS tracking and simple navigation bitmap maps (without zoom, you can store bitmap maps with different resolution instead) arrange maps as atlas for increasing and decreasing resolution trackloging in NMEA or GPX format compas screen (HPS) cockpit screen (CMS) location sharing via SMS with other trekbuddies and more.

It supports most commonly used map projections and grids, such as

Latitude/Longitude

Mercator

Transverse Mercator

Universal Transverse Mercator

Swedish Grid

British National Grid

Irish Grid

Swiss Grid

Lambert France I-IV as well as custom datums.

As a location source

bluetooth or serial port GPS

internal (integrated) GPS

NMEA file

O2 Germany network

may be used.

Changelog

- simple waypoints sorting - by (natural) order, by name and by distance

(from current position on map)

- wpt picture taking improved for recent devices (-> higher resolutions, autofocus: snapshot format & resolution re-adjustement required in configuration) still no preview however

- added support for wav and mp3 sound formats

("wpt-reached" sound etc: use proper file extension)

- added support for "australian" geocaching GPX extension

- CMS: added {pace} and {wpt-img}

- Tracks available in navigation menu

- GPX: using locatime in timestamps

- let me know what you think about it, can revert it back to gmt in the next version: for tool authors: simplified extensions schema (nmea:rmc and nmeadr merged into nmea): multiple links support (for navigation guides)

- S60 backlight "fix" (?... newer version of TrekBuddyService is required for correct operation)

- added handling of maps with missing/corrupted tiles: error msg appears only of first load
DOWNLOAD

IF YOU LIKE SHARK MOBILE SERVICE THEN BE COME WITH US AS A FOLLOWERS.
(JUST CLICK & SIGN IN : Follow this blog )

Locr V1.22.1

The ability to find photos again much more easily, giving you a clear overview of your photograph collection, regardless of its size!Automatic descriptions are generated for every photo based on geographical information.

Photos can also be shared with friends and family. locr is based on photographs with geotags. A geotag provides information about the position at which the photo was taken. Geotags can either be defined manually or automatically via GPS.

Compatible DevicesNokia:

3250 / 5500 / 5700 XpressMusic / 6110 Navigator / 6120 classic / 6290 / E50 / E61i / E65 / E70 / E90 Communicator / N71 / N73 / N75 / N76 / N77 / N80 / N80 Internet Edition / N91 / N92 / N93 / N95
DOWNLOAD

Widget Code For : MySpace , Facebook , Blogger , Typepad , Wordpress , Livejournal , Tagged , Multiply , Freewebs , Blogger Post , Netvibes , I Google , PageFlakes and much more.....
So i mean to sey Sharkmobile Widgets For Your Blog , Profile , or Web Page ....
Then Chack This out The Coooooolest Widget .....
Download Widgets Link

SymbianGuru GPS Action v1.0 S60 V3

Alarms and actions depend on your mobile location With GPS-Action

Your mobile will become even more smart: it will fire alarms and perform different actions depending on your geographical position (GPS).

Bored with alarms firing in the wrong place? GPS-Action will fire reminder exactly when you reach the target place, no sooner and no later! Depending on your geographical location GPS-Action will fire alarm, open the application, change profile, launch the website, open a document or a certain application for you. Bluetooth status change included, of course.

No more time lost with GPS-Action:

your mobile knows the right time and right place!

General information:
GPS-Action software sets automatic alarms and performs different actions according to the GPS and Cell position of the mobile phone.You can launch the application, which you have selected, launch the desired document or change the profile or a Buetooth status of your mobile phone when achieving some geographical position.Application may fire alarm and display a custom note as soon as you reach your destination.All actions are performed without any user interaction, only using the location based information.You have no GPS inside your mobile? No problem! GPS-Action works also with CellID information that is available to all devices without GPS module. Nokia native landmarks are included automatically into the application.

Easy to use softwareGPS-Action is very easy to use.

You need to undergo only three simple steps after installation:

Adjust software settings: here the main thing to adjust the way of geo-positioning: based on GPS, Cell location or both ways. Also you should define your working days and alarm sound volume here. Create your own landmarks (if you have your Nokia landmarks already, this step can be omitted): your target places where you want the alarms to be fired and actions to

be executed are called landmarks. You can define landmarks as your current place,

add landmarks from ready Nokia Landmarks (for devices with built-in GPS)

or define landmark coordinates manually.

Create alarms and actions schedule based on the landmarks: during this step you set type of action and alarm to be executed, as well as alarm frequency, minimal playtime, condition and corresponding landmark.GPS and Cell ID positioning: available to all S60.3 devices, also without GPS.There are two types of location positioning: GPS positioning and Cell positioning. GPS positioning is very precise. It is achieved via satellite and it is available for the devices

with built-in GPS or external GPS-receiver. This location type has its drawback: connection to the satellite is not possible through walls. So if you are inside, your GPS position will most probably not be retrieved. For this case, and also for the devices without built-in GPS receiver, we have the second positioning type: location by Cells. Cells are available at all GSM operators, it is the mast where your mobile is receiving the information about the GSM network and your mobile operator. This info is available everywhere, where the GSM network is available. However, the CellID positioning is not so precise. As the GPS positioning, sometimes cells are situated far from each other, so the area for your landmark can be vast enough

Key Features:

Alarms and actions performed silently, as soon as the geographical target is achieved Recurring alarms and actions with many scheduling conditions Variety of actions include: change profile, change BT status, open document, launch application, launch website. Action frequency can be restricted for the case you are approaching the same landmark more then once Time range for the action or alarm can be restricted, you will not be bothered at night. Two types of geo positioning: based on GPS and Cell information Available for all Series 60.3 devices, even to those without GPS receiver. Full synchronisation with native Nokia Landmarks Minimal

alarm playtime can be set, as well as personalized alarm note Customizable alarm

sound for every single alarm.

DOWNLOAD

Widget Code For : MySpace , Facebook , Blogger , Typepad , Wordpress , Livejournal , Tagged , Multiply , Freewebs , Blogger Post , Netvibes , I Google , PageFlakes and much more.....
So i mean to sey Sharkmobile Widgets For Your Blog , Profile , or Web Page ....
Then Chack This out The Coooooolest Widget .....
Download Widgets Link

Nokia Beta Labs - Nokia Friend View V0.823

Nokia Friend View is a location and micro - blogging service that helps you stay in touch with your close friends. It let’s you share where you are and how you feel from home, work, or on the go. With Friend View it is easy to meet up at only a moment’s notice. It is a social location service that helps you to keep up with your friends and family, meet them more easily, and randomly share with them what you do and feel. Let your friends know where you are and what you're up to, and find out what's up any time. Furthermore Friend View uses Integrated GPS, Bluetooth GPS and Network Based positioning when available.

When you use Friend View on your phone, it keeps a data connection open all the time, so we recommend that you only use it if you have a 'flat rate' data plan.

Note: Nokia Friend View is an experimental research project by Nokia Research Center.

Nokia Friend View is more fun on the go!

Compatibility:

Tested with Nokia 5320 XpressMusic, 6110 Navigator, 6210 Navigator, N95, N95 8GB, N82, N96, E71, E90, N80 and E61. Should work on all Nokia devices based on S60 3rd Edition.The browser interface has been tested with Firefox and Safari. We are working to add support for Internet Explorer 7

DOWNLOAD

Widget Code For : MySpace , Facebook , Blogger , Typepad , Wordpress , Livejournal , Tagged , Multiply , Freewebs , Blogger Post , Netvibes , I Google , PageFlakes and much more.....
So i mean to sey Sharkmobile Widgets For Your Blog , Profile , or Web Page ....
Then Chack This out The Coooooolest Widget .....
Download Widgets Link